Dryer vent cleaning
Whole-home duct cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Rotobrush Dryer Vent Cleaning in New York: What to Know First
Rotobrush dryer vent cleaning in New York typically runs between $149 and $289 for a standard single-family home, depending on vent length, access, and how long it’s been since the last cleaning. We’re an independent Rotobrush service provider, which means we service the machines and clean the vents connected to them without being tied to the manufacturer’s sales arm. Most jobs are completed in 60 to 90 minutes, and you’ll have a written price in your hands before we touch the vent. If you own a Rotobrush system in New York and the dryer is taking two cycles to dry a load, call us at (585) 517-2324. We answer the phone with a live person, any time of day, and we’ll tell you honestly whether you need a cleaning, a repair, or both.
How Rotobrush Products Fail – and How We Fix Them
Rotobrush makes solid equipment, but like anything mechanical, it has weak points. Here’s what we see most often in New York homes, and what we do about it.
- Rotobrush Roto-Disc brush heads losing tension. The Roto-Disc series uses flexible nylon discs that spin against the duct wall as the rod advances. After a few seasons of hard use, those discs lose their stiffness, which means they stop making full contact with the duct wall. The vent looks “cleaned” but a stubborn lint ring stays behind, especially on flexible foil ducting where the ridges hold debris. We check the discs before we start, and if they’re worn, we swap in fresh ones rather than running a tired head that just polishes the lint.
- Ghosting on the control panel of Rotobrush AiR+ models. We get calls from New York co-op and condo owners who say the AiR+ unit won’t power on, or it shuts off mid-cycle, or the display flashes and dies. Nine times out of ten it’s not the motor, it’s a loose connection at the power inlet or a tripped internal breaker from a voltage sag. Older buildings on the Upper West Side and in Queens run on aging electrical infrastructure, and Rotobrush equipment is sensitive to that. We check the simple stuff first: connections, breaker, cord integrity. Saves a lot of people a lot of money versus shipping the unit out for service.
- Clogged Rotobrush HEPA filter canisters on the negative-air side. The Rotobrush system’s HEPA filtration keeps what the brush knocks loose from recirculating into the room, but if that filter canister isn’t emptied and the filters aren’t replaced on schedule, suction drops fast. We’ve opened units in New York apartments where the filter looked like a felt brick. When suction drops, the brush is just stirring lint around instead of removing it. We check filter condition before every job and tell you straight if it needs replacing.
- Creeping run-time on the Rotobrush VAC and Roto-Vision lines. If a cleaning that used to take 45 minutes now takes 90, something’s off. Often it’s a worn carbon brush in the vacuum motor or a rod coupling that’s slipping. We diagnose it while we’re there, because a system running long means the motor’s working harder than it should. That’s how motors die young.
- Dryer vent re-clogging within weeks of a cleaning, especially with flex foil transitions. This isn’t always a Rotobrush equipment problem. Sometimes the real issue is the vent run itself. New York homes, particularly pre-war buildings, often have long horizontal vent runs with multiple elbows, or flex foil installed by a previous owner that’s now kinked or sagging. Even the best brush pass won’t keep a badly-designed vent clear. We’ll point it out, offer a reroute if code allows, and give you a written summary of exactly what we found.
Styles & brands we work with
Our Rotobrush Dryer Vent Cleaning Process
Every job follows the same sequence, whether it’s a brownstone in Brooklyn or a high-rise unit in Manhattan.
- 1
We answer the phone and schedule a window. You talk to a person, not a menu. We give you a defined arrival window and we show up in it.
- 2
We inspect the dryer, the vent run, and the Rotobrush unit itself. Before we run anything, we check the machine’s power connection, filter condition, and the full vent path from the dryer to the exterior termination. We look for kinks, sags, and lint buildup you can’t see from inside.
- 3
We agree on a written price. By now we know what the job involves. You get the number in writing before any work begins. If something changes, we stop and talk to you first.
- 4
We run the Rotobrush rotary brush down the vent and run negative-air extraction simultaneously. The brush agitation breaks the lint loose from the duct wall; the negative-pressure unit pulls it out and through a HEPA filter so it doesn’t end up in your laundry room.
- 5
We verify the airflow at the exterior vent. We check that air is moving the way it should, and we show you what came out of the vent. You’d be surprised what a New York dryer vent can hold: lint, birds’ nests, the occasional sock.
- 6
We leave you a written summary and the 365-Day Done Right Promise in writing. The summary tells you what we found, what we did, and what it cost. If it’s not done right within 365 days, we come back and make it right, at no charge. That’s not a courtesy; it’s in writing.
What Rotobrush Dryer Vent Cleaning Costs in New York
Here are the numbers we quote most often in New York:
- Standard single-family home, vent run under 15 feet: $149 – $199. Straight shot to an exterior wall, accessible termination point, no surprises.
- Longer or multi-elbow runs, second-floor laundry, or roof terminations: $199 – $249. More rod length, more time to snake through bends, sometimes ladder work at the exterior cap.
- Vent with significant blockage or a bird’s nest at the cap: $249 – $289. This is when we’re pulling out compacted lint and debris, and possibly replacing the vent cap or adding a bird guard while we’re at it.
- Rerouting a flex-foil mess or repairing a damaged vent run: quoted on-site. We won’t give you a number for this sight unseen, because every building in New York is different. But you’ll have a written number before we cut into anything.
What moves the price is vent length, number of elbows, access to the termination point, and how long it’s been since the last cleaning. What doesn’t move the price is the Rotobrush machine’s condition; checking the unit and confirming it’s running right is part of the visit. Call (585) 517-2324 for a free estimate on your specific setup.
See the difference
Before
After
Before
After
Before
AfterWhy New York Homeowners Call Kestrel Air Duct New York for Rotobrush Work
We’ve been cleaning ductwork and dryer vents across New York for years, from high-rise co-ops on the Upper West Side to ground-floor walk-ups in Queens. Dale Whitmore, our owner, learned HVAC mechanics at Los Angeles Trade-Technical College, where instructors taught hands-on sheet-metal and air-handling fundamentals the old way. That background shapes how we work: we check the system before we clean it, we explain what we’re doing, and we write everything down. Every Kestrel job operates under the Kingswell Guarantee, which means four specific things: a written price before work begins, a defined arrival window, a clean job site, and a written guarantee with a free return visit if the work fails within the guarantee period. We’re also fluent in other brands, and we service Lennox, Trane, and Carrier equipment, so if your dryer vent cleaning reveals a broader HVAC issue, we can speak to it intelligently. Our techs are background-checked and uniformed, and they run Rotobrush, Nikro, and Abatement Technologies equipment, not a shop vac from the hardware store. We tell you what we found, what we did, and what it cost, in writing, before we leave.
FAQs
Cleaning the vent with a rotary brush and negative-air extraction, using the correct diameter head and proper technique, is a manufacturer-expected maintenance procedure and will not void a Rotobrush warranty. What voids warranties is neglect: running the machine with a clogged HEPA filter canister, continuing to use worn brush discs that score the duct wall, or ignoring electrical warning signs. We’re an independent Rotobrush service provider, not an authorized repair center, but we follow warranty-safe practices on every job and document what we did.
The answer is usually both, but the order matters. A clogged vent forces the machine’s vacuum motor to work against a blocked airway, which causes the suction drop you’re feeling. But if the HEPA filter canister is packed, that alone can strangle airflow even with a clean vent. We check the vent first, then the canister, then the motor’s carbon brushes. New York apartments with long vent runs see this pattern all the time. Call (585) 517-2324 and we’ll diagnose it on-site.
Every 12 months for most households; every 6 months if you run more than four loads a week, have pets that shed, or live in an older New York building with a long vent run. Multi-unit buildings where several dryers share a common vent stack may need attention more often. The 12-month guideline isn’t a sales pitch; it’s what we tell our own families.
That depends on what’s failing. A worn brush head, a clogged filter canister, or a loose hose connection is a simple fix we can often handle during a routine cleaning visit. A burned-out vacuum motor or a shorted control board on an older unit becomes a judgment call. We’ll give you our honest read, in writing, with the repair cost next to the replacement cost. No pressure either way.
Yes. Roof terminations are common in New York, especially in older walk-ups and townhouses. We run the rotary brush the full length of the run and verify airflow at the roof cap. If the run is too long or too snake-prone for a brush to work safely, we’ll tell you that too, and we’ll discuss what a proper reroute would cost before we recommend anything.
Get a Free Estimate for Rotobrush Dryer Vent Cleaning in New York
If your dryer is taking too long, your Rotobrush unit feels weak, or it’s simply been a year or more since the vent was last cleaned, call Kestrel Air Duct New York at (585) 517-2324. You’ll talk to a live person, we’ll give you a straight answer, and you’ll have a written price before any work starts. That’s the Kingswell Guarantee, and it applies to every job we do in New York.
Written by Dale Whitmore, Owner, Kestrel Air Duct New York at Kestrel Air Duct New York, serving New York and nearby areas.